FujiFilm Apeos C7070 Reference Manual page 32

When Adjusting the Fold to the Any Length
You need to enter the value calculated based on measured value and the target value.
The calculating method is the following.
Value to enter (A) = 210 + ("measured value" - "target value")
Value to enter (B) = "measured value" - "target value"
For example, when adjusting as the shown below, calculate as the following.
Target value
206 mm (A)
Measured value
214 mm (A)
Calculation formula
Value to enter (A) = 210 + ("214 (measured value)" - "206 (target value)") = "218"
Value to enter (B) = "6 (measured value)" - "2 (target value)" = "4"
Note
 The target value A&B can be set within the following range.
Target value
A
B
32
2 Appendix
("A" Length: 206 mm, "B" Length: 2 mm)
108 mm 106 mm
420 mm
("A" Length: 214 mm, "B" Length: 6 mm)
106 mm 100 mm
420 mm
C Fold
0 to 2 mm
0 to 8 mm
Z Fold
0 to 2 mm
0 to 2 mm
A=206 mm
B=2 mm
A=214 mm
B=6 mm
Z Fold Half Sheet
(Paper length/2 - 5) mm to
(Paper length/2) mm
0 to 2 mm