FujiFilm Apeos C7070 Reference Manual page 3

2
Appendix
2.1 Emulation
When using the emulation mode, you can get the print results similar to those of other companies'
printers.
Overview of Emulation Feature
This machine is compatible with following emulation mode.
Emulation mode
ESC/P
PCL
HP-GL
HP-GL/2
Note
For details of each mode, contact your local representative.

Changing the print language
This machine is compatible with multi-emulation. Due to this, you can switch the corresponding print
language.
Changing the command
There are commands to change the corresponding print language.
Automatic change
The machine analyzes the data received by the host interface and automatically identifies the print
language.
Protocol dependence
You can fix the print language for each protocol (USB, IPP, LPD, Port9100, WSD).
Log in to Administrator Mode in Internet Services, and set Print Mode for each protocol in [USB] or
[Protocols] of the [Network] tab.
Available font
User-defined characters (external fonts) can be used with ESC/P.
User-defined characters are registered as bitmap fonts and saved even after the power is turned off.
Sharing between print languages is not possible.
LQ1900K II+
HP-CLJ5500 (color), HP-LJ4200 (black and white)
7586B or DJ750C Plus
DJ750C Plus
Printer to be emulated
2.1 Emulation
3