Placing This Unit On A Stand - Roland V-combo VR-09 Reference Manual

Getting Ready

Placing This Unit on a Stand

Be careful not to pinch your fingers when setting up the stand.
If you place this unit on a stand, you must use the KS-18Z or the KS-12.
Place the instrument on the stand as follows.
* If using a pedalboard (PK-9; sold separately), please use the KS-12.
KS-18Z
Align the front of this
unit with the front of
the stand
* The illustration shows the VR-09.
KS-12
* The illustration shows the VR-09.
10
Adjust so that
the height does
not exceed 1
meter (Adjust
the stand to a
level no higher
than the fifth
level from the
bottom)
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard fit into the holes
provided for the rubber feet.
Top view
Adjust the width of the stand so
that the rubber feet of this unit
straddle the stand
Top view