Attaching The Spd-20X To A Drum Stand - Roland Octapad SPD-20X Owner's Manual

Attaching the SPD-20X to a Drum Stand

When you attach the unit to a drum stand (e.g. Roland PDS-10, APC-33: sold separately), please use the
pre-installed screws to fix it up accordingly.
1
2
The screws included with the APC-33 cannot be used.
NOTE
Using a phillips screwdriver, remove the four screws from the bottom of
the SPD-20X.
Use the four screws you removed in step 1 to attach the stand holder to
the bottom of the SPD-20X.
11