Fade-In, Fade-Out; Zooming - Sanyo VM-EX30P Instruction Manual

CAMCORDER OPERATION

Fade-in, Fade-out

The fade-in will bring the picture and sound gradually.
Fade-out will do the reverse, gradually erasing the picture
and sound.
1
For example, after recording a title, set the camcorder
to recording pause mode, then press the
2
Press the REC START/STOP
sound will gradually fade in from a white background.
�Note: During the fade-in or fade-out
in the viewfinder. Do not press the
START/STOP button while
in the viewfinder, as that will cancel the fade-in
function.
3
Press the
REC START/STOP
picture and sound will gradually fade out to a white
background, and the camcorder will go into recording
pause mode and the fade function is cancelled.
During recording, the fade-out function can be
�Note:
cancelled or turned on by pressing the
button.
button.
FADE
button. The picture and
"FADE" flashes
REC
"FADE" is flashing
button again. The
PAUSE
FADE
FADE

Zooming

Press the side of power zoom button for a close-up
"T"
shot (A: Zoom-in) and the
(8: Zoom-out).
�[!!] [!]
�Notes:
• Picture vibration is more noticeable when zooming in
to record a close-up shot. If possible, use a tripod or
make sure that the camcorder is kept steady.
•When the POWER
will automatically return to the full zoom-out position.
1 2
side for a wide-angle shot
"W"
switch is set to "OFF", the zoom