Omron SYSMAC C200HW-ZW3AT2-E-V2 Operation Manual page 64

L: Data Link
Offsets
50
Offsets can be set by pressing the F6 (Offset) Key to display the "Offset" column
in the table. Offsets do not need to be set unless they are required.
In the "Offset" column, specify the offset for each reception node.
Setting Example
The following is an example of data link areas and the corresponding data link
tables.
Area 1 of Node 1
Node 1
(15 words)
Node 2
(20 words)
Node 3
(15 words)
Data Link Table for Node 1
Data Link Table for Node 2
Data Link Table for Node 3
Area 1 of Node 2
Node 1
(10 words)
Node 2
(30 words)
Section 5-3
Area 1 of Node 3
Node 1
(15 words)
Node 2
(30 words)
Node 3
(15 words)
Receive area
Send area