Advertisement
Stand-by condition
The following screen is visualized when the control panel is in stand-by condition.
Meter of zones
in trouble
Function associated to the key F1 .
In this case the pressure of the Key F1
allow the entry in the programming
menù.
Function associated to the key F2.
In this case the pressure of the Key F2
allow the entry in the Utility menù.
Page 6
NOTIFIER ITALIA
Meter of system
Meter of trouble in
trouble
excluded zone
Function associated to the key
F3. In this case the pressure of
the Key F3 allow the entry in the
Exclusion menù.
Programming manual
Doc. M-145.2-AM1000-ENG Rev A.1
Icon for the indication of the control panel
status. Without alarm and troubles the
NOTIFIER symbol is visualized.
With excluded points/zone an
exclamation marks ( ! ) is visualized.
With alarms the symbol of a Flame is
visualized.
With troubles the symbol Triangle is
visualized.
Note. The alarm status prevail when
there are alarms and troubles.
Function associated to the key
F4. In this case the pressure of
the Key F4 allow the entry in
the Test menù.
Date - Hour
AM-1000
AM1000_manu
Advertisement
