Advertisement
With the first pressure of the return key
It is possible to select the line style (NORMAL - LOOP), press the return key
programming.
Press the right key 4to modify the parameter priority scan following paragraph
With the 56select the voice to be modified ("Last. – Addr " or "Seq.- n°") an pressing the return key
editing function is activated.
With 56it is possible to insert the data and with the return key
To exit the menù use the escape key
"Last. – Addr " to program the number of modules (starting from the address "0") on which we want to make
the priority scan.
The number "Seq.- n°" is a parameter to define the frequency of the query from the control panel to the
modules. For example if we insert the number 20, the control panel will query the modules, enabled as
Priority SCAN, every 20 detectors.
The scansion of the modules quicker will be possible with the insertion of the value 10.
Last. – Addr
n. 0
n. XX
% Note: The priority scan is valid for all the address, for each line, both for the input and out
modules.
•
•
T
i
m
i
n
g
s
T
i
m
i
n
g
s
This sub menù allows the programming of the delay time for the alarm outputs, the delay time for the check
of the detectors alarms, inhibition of the silence, and so on.
Alarms outputs
AM-1000
AM1000_manu
the editing function is activated, with the 56
.
Seq.- n°
n. XX
n. XX
Programming manual
Doc. M-145.2-AM1000-ENG Rev A.1
to confirm the
:
they are confirmed.
CYCLE OF QUESTIONS
Normal query (without priority)
Query with priority cycle
the
Page 11
NOTIFIER ITALIA
Advertisement
