Advertisement
Type ID for the UDS unit
For the Uds panels two specific Type ID are reserved, UDS1 and UDS2.
We remember that the UDS can be installed from the the address at the beginning of the dozen (excepted
from 0 to 9), using from a minimum of 2 to a maximum for 6 address.
The standard installation, compatible with the UDS-IN unit, occupe the two first address to which is assigned
;
the Type ID
this kind of operation is allowed for the first address and is automatically extended to the
second one.
In the following 4 address it is possible to install, in singly way, the optional modules that have been
introduced with the new UDS-2N unit to do this it is enough to insert the UDS2 type-ID.
To have a detailed description of the associated functions for the modules to the UDS unit, we suggest to
look up the dedicated manuals.
For the UDS modules it is possible to obtain the following specific information:
Address
address x0
address x l
address x2
address x3
address x4
address x5
UDS unit removal
If we set up the type-ID NONE on the first address the UDS unit is totally removed (including the UDS2
optional modules).
This is the only method to remove the type-ID UDS 1; on the contrary, the UDS2 modules can be singly
removed.
AM-1000
AM1000_manu
Type ID
UDS1
"ALL1"
UDS1
"ALL2"
UDS2
"GEN_FAULT"
UDS2
"EXT_FAULT"
UDS2
"AUT_DIS]"
UDS2
"POW_FAULT"
Programming manual
Doc. M-145.2-AM1000-ENG Rev A.1
Description
Page 23
NOTIFIER ITALIA
Advertisement
