Bosch HPC 400 Operating Instructions Manual page 26

26 | Working with the main menu
Operating the appliance
Set the holiday time
▶ Open the menu for the holiday program.
The menu item for entering the start and end date of the holiday period opens. The
first (= left-hand) input field for entering the start date is highlighted.
▶ Turn the selector to highlight the day, months or year for the start or end date and
press the selector.
The selected field is enabled for input. If the holiday time has not yet been entered,
today's date is set as the start date. The end date is a week after the start date.
▶ Turn the selector to set the day, month or year for the start or the end date and press
the selector.
▶ Once the holiday time has been set, turn the selector to highlight Continue and press
the selector.
If the display switches to the higher menu level, the user interface is operating with
the modified settings.
If the user interface does not switch to the higher menu level, follow the instructions
on the display.
Select and set the heating circuit and DHW system for the holiday program
▶ Open the menu for the holiday program.
▶ Turn the selector to highlight Selection heat. circ./DHW.
▶ Press the selector to open the Selection heat. circ./DHW menu.
If Total system is selected, all parts of the system are highlighted.
▶ Turn the selector to highlight a heating circuit or a DHW system.
▶ Press the selector.
▶ The selection for the heating circuit or DHW system is undone. Press the selector
again to select the heating circuit or the DHW system again.
Undoing the selection of a heating circuit or DHW system also automatically undoes
the selection of the entire system.
▶ Turn the selector to highlight Continue and press the selector.
The user interface operates with the modified settings.
▶ Check the settings for heating and DHW and make any necessary adjustments
( Chapter 5.6, page 24).
Interrupt a holiday program
During the holiday period, the display indicates when the holiday program will be active
until. If two or more heating circuits are installed, the heating circuit must be selected
before interrupting the holiday program ( Chapter 4.1, page 8).
If the holiday program is set to As Saturday, you can also interrupt the holiday program
by turning the selector. The change is effective until the active time program reaches the
next switching time. The holiday program applies again from this switching time onwards.
Table 29 Setting up, interrupting or deleting a holiday program
6 720 817 986 (2015/07)
CLIMATE CONTROL SYSTEMS
VOGEL NOOT
&
Result
6 720 811 136-33.1O
6 720 811 136-34.1O
6 720 811 136-35.1O
6 720 811 136-36.1O
HPC 400