Using Multiple Projectors; Multiple Projector Adjustment Overview - Epson EB-PU2113W User Manual

• To automatically run the light source calibration every 100 hours of projector usage, select Run
Periodically.
• To schedule automatic calibration, select Schedule Settings.
• To see the last time the projector performed a calibration, select Last Run.
5. When you are finished, select Return and press the Enter button to return to the Reset menu.
Parent topic:
Related tasks
Saving a Scheduled Event

Using Multiple Projectors

You can combine the projected images from two or more projectors to create one large image or overlap
the images from multiple projectors to create a single bright image. Follow the instructions in these
sections to set up and project from multiple projectors.

Multiple Projector Adjustment Overview

Projector Identification System for Multiple Projector Control
Tiling Images into One Image
Blending the Image Edges
Adjusting the Black Level
Matching Tint and Brightness (Screen Matching)
Scaling an Image
Simple Stacking for One Bright Image
Parent topic:
Multiple Projector Adjustment Overview
If you are combining images from multiple projectors on a network, you can assign one projector as the
"master" and automatically adjust all the images to match the "master" image. If the projectors are not
connected to a network, you can match each projector's images manually.
Note: Make sure all networked projectors are connected using LAN cables and have been assigned an
IP address. Also disable the 4K Enhancement and Sleep Mode settings on each projector so they do
not turn off during adjustment.
1. Turn on all the projectors.
Using Advanced Image Adjustment Features
Adjusting Projector Features
192