Projection Distance; Projector Connections; Connecting To Video Sources - Epson EB-PU2113W User Manual

If you project from the ceiling or from the rear, select the correct Projection setting and, if necessary,
adjust the OSD Rotation setting.
You can switch the Projection setting between Front and Front/Ceiling or Rear and Rear/Ceiling by
holding the A/V Mute button on the remote control for approximately 5 seconds.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Use the Projection Distance Calculator
approximately how far to place the projector from the screen based on the size of the projected image.
Parent topic:

Projector Connections

See these sections to connect the projector to a variety of projection sources.
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode
to ensure the projector's internal temperature is regulated properly.

Connecting to Video Sources

Connecting to Computer Sources
Connecting to an HDBaseT Transmitter
Connecting to External Speakers
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
Connecting to an HDMI Video Source
Projector Placement
here
Projector Placement
Setting Up the Projector
(U.S.), here (Canada), or here
34
(Caribbean) to determine