Laser Safety Information (Eb-Pu2120W/Eb-Pu2220B) - Epson EB-PU2113W User Manual

• No direct exposure to the beam shall be permitted.
Caution: Do not disassemble the projector when disposing of it. Dispose according to your local or
national laws and regulations.
Note: See the link below for additional safety laser cautions and other general safety instructions.
Parent topic:

Laser Safety Information (EB-PU2120W/EB-PU2220B)

This projector is a Class 1/RG3 laser product that complies with the IEC 60825-1:2014 international
standard for laser products and the IEC 62471-5:2015 international standard for laser illuminated
projectors. This projector also complies with US requirements for LIPs (Laser Illuminated Projectors) via
the terms of US FDA CDRH Classification and Requirements for Laser Illuminated Projectors (LIPs)
(Laser Notice No. 57) dated May 8, 2019.
This projector can only be installed or used by qualified personnel with an approved laser light show
variance. Installers must have a valid variance for production of Class 3B and Class 4 laser light shows
and/or for incorporation of the RG3 LIPs into their shows. Dealers, distributors, and end-users are also
required to obtain a valid laser light show variance. If you are renting out this projector in the US, it shall
only be delivered to parties that demonstrate they have a valid variance in effect at the time of delivery
that permits the production of laser light shows incorporating either Class 3B/4, or RG3 LIP projectors.
Notes regarding user of Class 1/RG3 Projectors in the US and Variances:
• To obtain a variance, purchaser will sign a variance application which indicates legal agreement to
follow the terms of operation as defined in the variance application and in the 'terms' of the final
variance permit from the US FDA CDRH.
• Prior to variance application, purchaser will be provided the following:
• Laser Safety Awareness Training
• LIP projector Operator Training
• Information regarding safe and legal installation, set up, and use.
This projector contains a high-powered laser component and the following precautions should be taken
when operating the projector to avoid injury or damage:
• No direct exposure to the beam shall be permitted within the safety exclusion zone that is determined
by the light beam's Hazard Distance (HD). See hazard distance section for information.
• Never open any covers on the projector except as specifically explained in this manual. Never attempt
to disassemble or modify the projector.
Important Safety Instructions
317