Fcc Compliance Statement - Epson EB-PU2113W User Manual

No. Symbol
28
29
30
Parent topic:

FCC Compliance Statement

EB-PU2113W/EB-PU2213B/EB-PU2116/EB-PU2216B
For United States Users
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Approved Standards
—
ISO7010
No. W027
ISO3864
IEC60417
No. 5109
Notices
Description
To indicate that looking into the lens
while projecting is prohibited.
Warning, optical radiation (such as UV,
visible light, IR)
Taking care to avoid injury to eyes and
skin when in the vicinity of optical
radiation.
Not to be used in residential areas
To identify electrical equipment which is
not suitable for a residential area.
329