Connecting Multiple Projectors Of The Same Model; Projecting The Same Image In A Daisy-Chain Connection - Epson EB-810E User Manual

Connecting Multiple Projectors of the Same Model

You can project the same image from multiple projectors.
You can connect multiple projectors using either of the following methods:
daisy-chain connection or distributor connection. You can connect up to four
projectors in a daisy-chain connection.
Attention
When installing the projectors, make sure hot air from the exhaust vent does not
go into the air intake vent of another projector.
g g Related Links
• "Projecting the Same Image in a Daisy-Chain Connection"
Projecting the Same Image in a Daisy-Chain
Connection
a Connect the projector to the computer using the HDMI cable, and then
connect the HDMI1 port and HDMI Out port of the projectors using
the HDMI cable.
p.36
b
Press the [Menu] button on the control panel or remote control.
c Select the necessary HDMI Link setting in the projector's Signal I/O
menu. See the following list for example settings when connecting three
projectors.
• The image is output from the HDMI Out port only when
HDMI1 is selected as the image source.
a
• If you are connecting projectors in a daisy-chain, connect them
as shown below.
Setting Item
First projector to
connect to the
device
HDMI Out Power On
Link
HDMI Out Off
Terminal End
This may not work if five or more projectors are connected in a
daisy-chain or if the settings are not correct.
a
36
B C
Projectors in the Terminal
middle projector
On On
Off On