Projection Modes; Changing The Projection Mode Using The Remote Control - Epson EB-PU2113W User Manual

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Note: When you use multiple projectors in the same room or when there are obstacles around the
remote receiver, connect the remote control to the projector using a commercially available 3.5 mm
stereo mini-jack audio cable. When the remote control is connected, the remote receiver on the projector
is disabled.
Parent topic:
Related tasks
Replacing the Remote Control Batteries

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind
a translucent screen.
Note: You can change the projection mode using the remote control or by changing the Projection
setting in the Extended menu.

Changing the Projection Mode Using the Remote Control

Changing the Projection Mode Using the Menus
Parent topic:
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
Using Basic Projector Features
Using Basic Projector Features
145