Saving Settings To Memory And Using Saved Settings - Epson EB-PU2113W User Manual

6. Select the Extended menu and press Enter.
7. Select the Multi-Projection setting and press Enter.
8. Select the Simple Stacking setting and press Enter.
9. Do one of the following:
• Select Point Correction in the Geometry Correction menu to divide the projected image into a
grid and correct the distortion in increments. You can move the points on the grid between 0.5 to
600 pixels in any direction, including outside of the projection range.
• Select Start Auto Adjustment to automatically adjust the projected image using the camera
assist functions.
Note: This setting is only available when the optional external camera is installed.
If there are any gaps in the pixels of the projected images, adjust the Point Correction setting
manually.
10. If you have not installed the optional external camera, adjust the Focus, Zoom, Lens Shift, and
Geometry Correction settings manually.
11. Press the Menu button to exit.
Parent topic:
Related references
Projector Network Settings - Network Menu
Projector Feature Settings - Settings Menu

Saving Settings to Memory and Using Saved Settings

You can save customized settings and then select the saved settings whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
Simple Stacking for One Bright Image
214