6 Operating the Application
Table 6-4
No.
1.
In the default message text of the LOGO! TD, the
setpoint pressure, the actual pressure of the cooling
water system and setpoint speed of the motor are
output. The values are given as the physical
variables "bar" and "revolutions per minute".
Press the cursor keys or to show more
message texts.
2.
In the second message text of the LOGO! TD; the
operating hours counter is displayed. The value
"Lapsed time" indicates how many hours the motor
has already been in operation. The output box
"Remaining time" displays the hours until the next
maintenance of the motor.
When loading the program into the LOGO!, the
operating hours counter is reset.
3.
In the third message text of the LOGO! TD, the
current date and time are displayed.
If you wish to set the date and time, you can go on
with the following item, starting from this display.
Use the key sequence ESC and to go the
4.
menu item "Set...". By pressing the LOGO! key OK
three times, you go to the menu item "Set date and
clock".
Navigate to the spot you want to adjust with the keys
and . Set the value with the buttons and .
By pressing the OK button, date and time are
saved. By pressing the ESC key twice, you return
to the display of the previous item.
If the fill level in the tank falls to "dry run" during
5.
operation, the display automatically changes to this
message text.
Set23_RegSim
Entry ID: 23753479,
V2.3.S,
Action
02/2014
Comments
28