6 Operating the Application
No.
Observe the display for the "cooling water tank" in
6.
the "mainscreen" of the simulated KTP600 Basic
color PN.
The display for the "cooling water tank" (1) changes
from green to red.
7.
Observe the motor speed setpoint value and the
pressure loss in the trend view of the LOGO!Soft
Comfort.
Check "Trend lines" "SP".
Also see the descriptions concerning Figure 7-2.
8.
Observe the motor speed setpoint value and the
pressure loss in the "regulation" screen of the
simulated KTP600 Basic color PN.
9.
Make sure that after the test, all the electrodes of
the probe for level monitoring are actually in contact
with the water.
Set23_RegSim
Entry ID: 23753479,
V2.3.S,
Action
02/2014
Comments
1
26