Transferring Your Images (I.link) (Windows) - Panasonic PV-DV102PN Service Manual

Transferring Your Images (i.LINK) (Windows)

PC Connection with DV Interface Cable (i.LINK)
A video clip can be transferred directly to your PC (Personal Computer) via a DV Interface
Cable (i.LINK) (not supplied) using products and software from a number of video editing
software companies.
Using products from video editing software companies allows you to capture and edit
video clips using the DV Interface (i.LINK).
Our DVC being OHCI compliant should have no problem working
with any OHCI compliant Firewire Card/video - Editing software
package.
Note
• PC must be equipped with an i.LINK terminal.
• During Palmcorder playback, do not disconnect the DV Interface Cable (i.LINK) or turn
the Palmcorder off as this may cause a PC hang-up error.
• For PHOTOVU/MPEG4 Movie Messenger System, do not use 2 i.LINK terminals on
your PC at the same time.
• PHOTOVU/MPEG4 Movie Messenger System i.LINK (DV) operates normally with
Windows 98SE or later operating system.
• PHOTOVU/MPEG4 Movie Messenger System i.LINK connection may not work with
some DV Interface boards. In this case, use the software included with the board.
• 1394 (i.LINK) interface must conform to OHCI (Open Host Controller Interface
Specification).
PC Connector
DV Interface Cable (i.LINK)
(6-to-4 pin) (not supplied)
DV Input/Output
(i.LINK)
Connector
73