Panasonic PV-DV102PN Service Manual page 14

4.1.7. HOW TO REMOVE A JAMMED TAPE
Remove a jammed tape in Electrical Method as follows:
1. Remove the Cabinet Parts. Then, remove the 3 Screws and the
Mechanism Base Unit from the Mechanism Chassis Ass'y as
shown. Refer to
in DISASSEMBLY/ASSEMBLY PROCEDURES.
2. Apply +3 V DC Power Supply to the Portion "a" and "b" on the
Mechanism F.P.C. Unit.
Note:
DO NOT let eject the Garage Unit with grasping the Cassette
Cover. If the Garage Unit is in the up position, a cassette tape may
be damaged.
3. When the Mechanism is in EJECT position (snapped sound),
remove the Power Supply immediately.
4. Rewind the tape into a cassette tape by turning the Capstan Rotor
clockwise with grasping the Cassette Cover.
"CABINET SECTION" &
Fig. 6-1
Fig. 6-2
"MECHANISM
14
SECTION"