1. Set the Capstan Tilt Adjustment Tool between Capstan Unit and
Chassis.
2. Tighten the Capstan Adjust Screw so that the plate of Capstan Unit
just touches to the Capstan Tilt Adjustment Tool.
6.2.4. T4 POST HEIGHT CONFIRMATION
Purpose:
To confirm so that the height of the T4 Post is proper.
Symptom:
If the height of the T4 Post is incorrect, the tape might be damaged.
1. To remove the Cassette Cover, refer to "Disassembly Method" of
"CABINET SECTION" in DISASSEMBLY/ASSEMBLY
PROSEDURES.
2. After removing the Cassette Cover, insert the tape without the
Cassette Cover.
Fig. T2-1
Fig. T2-2
62