Panasonic PV-DV102PN Service Manual page 22

4.1.12. SPECIAL NOTE
All integrated circuits and many other semiconductor devices are electrostatically sensitive and
therefore require the special handlings techniques described under the "ELECTROSTATICALLY
SENSITIVE (ES) DEVICES" section of this service manual.
4.1.13. REPLACEMENT PROCEDURE FOR LEADLESS (CHIP) COMPONENT
The following procedures are recommended for the replacement of the leadless components
used in this Unit.
1. Preparation for replacement
A. Soldering Iron
Use a pencil-type soldering iron using less than 30 watts.
B. Solder
Eutectic Solder (Tin 63 %, Lead 37 %) is recommended.
C. Soldering time
Do not apply heat for more than 4 seconds.
D. Preheating
22