Panasonic PV-DV102PN Service Manual page 221

PHOTOVU/MPEG4 Movie Messenger System
For Windows 2000 users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CAPTURE" appears in the EVF or the LCD monitor.
• The "Found New Hardware" screen of Windows is displayed.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. However, testing by the manufacturer has
confirmed functionality of this palmcorder with Windows XP/2000.
Click [Yes] and proceed.
Note
• For extended use, the AC Adaptor should be used as a power source.
For Windows 98SE/Me users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CAPTURE" appears in the EVF or the LCD monitor.
Note
• For extended use, the AC Adaptor should be used as a power source.
To disconnect USB Cable safely (Windows 2000/XP)
If USB Cable is disconnected while computer is on, error message may appear. In such a
case click [OK] and close the dialog box. By following the steps you can disconnect the
cable safely.
[ This screen is an example (Windows 2000) ]
60
1
Double-click the
tray.
2
Select [Panasonic Digital
Palmcorder] and click [Stop].
3
Verify [Panasonic Digital
Palmcorder] is selected and click
[OK].
4
Click [OK].
• You can safely disconnect the cable.
Note
• Some OS, such as Windows 98SE or Me,
may not show the icon indication that you
may safely disconnect in task tray. (OS
may be set not to show) Close
PHOTOVU/MPEG4 Movie Messenger
System, then disconnect the USB Cable.
icon in the task