Table of Contents
Advertisement
CD SECTION
CD AGING MODE
Procedure:
1. Press the
button to turn the power on.
I/
1
[FUNCTION]
2. Press the
button to set the CD function, and press the
3. Press three buttons of
M >
4. The set displays "AGING SEL=00". Between it is displayed, press the
5. The sequence during the CD aging mode is following as below.
Note: If the triple button pressing failed to activate the CD test mode, press the
M >
button. Also, release the
If the consequence was that display "AGING SEL=01", press the
servicing.
CD aging mode sequence:
CD disk tray open
CD disc tray close
TOC read
Playback track 1
Playback last track
Display aging number
6. To release from this mode, press the
Note: Refer to "Error History Display Mode" (page 5) for display at an error occurred.
16
[CD ]
,
Z
, and
(MD) simultaneously.
x
[CD ]
x
(MD),
, and
M >
Z
. m
button to turn the power off.
I/
1
[CD ]
Z
button to insert a disc.
[CD ]
button to start CD aging mode.
Z
[CD ]
Z
button, and the
(MD) button in this order while pressing the
x
buttons in this order, when releasing the buttons.
button to display "AGING SEL=00". "AGING SEL=01" is not used in
Advertisement
Table of Contents
