Battery Installation And Removal - Graco GX21 Operation, Parts

Battery Installation and Removal

Always start with a fully charged battery.
Do not splash or immerse battery or
charger in water. See battery and charger
information shipped with the sprayer.
Replace and charge battery only in a
well-ventilated area and away from
flammable or combustible materials,
including paints and solvents.
3A8429B
Remove and install battery into the sprayer
as follows:
1. Remove the used battery, if in place.
2. Install battery by aligning the battery
pack with the rails inside the sprayer
and sliding it in until the battery pack is
firmly seated. Ensure that it does not
disengage.
Setup
13