ClearShot Liquid Cartridge Installation/Removal
If ClearShot Liquid cartridge removal or
installation is difficult, lubricate cartridge
o-rings and/or cartridge bore with a few
drops of ClearShot Liquid. Water-based
lubricants can be used as well.
Do not use Fusion grease or other petro-
leum- or vegetable-based lubricants. They
will cause cartridge o-rings to swell and
stick inside gun handle.
Installation
1. Follow Pressure Relief Procedure, page
17.
2. Remove plastic cap from new ClearShot
Liquid cartridge.
F
. 30
IG
312666F
TI113340a
ClearShot Liquid Cartridge Installation/Removal
3. Insert cartridge into gun handle. Ensure
cartridge tabs are aligned correctly with
cartridge tab recesses in gun handle.
F
. 31
IG
4. After cartridge is fully inserted, turn car-
tridge 1/4 turn clockwise to lock it into gun
handle.
F
. 32
IG
5. Turn air valve ON and prime ClearShot Liq-
uid dosing pump.
a. Trigger gun 20 times to prime dosing
pump.
b. Trigger gun onto cardboard to see
dosed ClearShot Liquid.
6. Resume spraying.
TI113341a
TI113342a
23