Fill Pump - Graco GX21 Operation, Parts

Operation

Fill Pump

For Stand Models
1. Move suction tube to paint pail and
submerge suction tube in paint. When
spraying oil-based or flammable
materials, follow Grounding
Instructions, page 10.
2. Press ON/OFF switch to ON position.
Button is illuminated when power is ON.
3. Wait to see paint coming out of the
drain tube.
4. Press ON/OFF switch to OFF position.
Button is not illuminated when power is
OFF.
NOTE: Some fluids may prime faster if
the ON/OFF switch is momentarily
turned off so the pump can slow and
stop. Turn ON/OFF switch on and off
several times if necessary.
18
For Hopper Models
1. Add paint to hopper. When spraying
oil-based or flammable materials, follow
Grounding Instructions, page 10.
2. Press ON/OFF switch to ON position.
Button is illuminated when power is ON.
3. Wait to see paint coming out of the
drain tube.
4. Press ON/OFF switch to OFF position.
Button is not illuminated when power is
OFF.
NOTE: Some fluids may prime faster if
the ON/OFF switch is momentarily
turned off so the pump can slow and
stop. Turn ON/OFF switch on and off
several times if necessary.
3A8429B