Battery Installation And Removal - Graco GX21 Cordless Operation, Parts

Setup
Battery Installation and
Removal
Always start with a fully charged battery.
Do not splash or immerse battery or
charger in water. See battery and charger
information shipped with the sprayer.
Replace and charge battery only in a
well-ventilated area and away from
flammable or combustible materials,
including paints and solvents.
Remove and install battery into the sprayer
as follows:
1. Remove the used battery, if in place.
12
2. Install battery by aligning the battery
pack with the rails inside the sprayer and
sliding it in until the battery pack is firmly
seated. Ensure that it does not
disengage.
3A8429A