Master MAS-X18 User Manual page 32

STEP 4
a. Attach the Computer Bracket (16) on the Handlebar (13) by one Self-tapping Screw (17) until tight by the Screwdriver
(23).
b. Slide the Computer Bracket (16) into the flute on the back of the Computer (18), and load 2 x AAA batteries into the
battery box, then remember to insert the Sensor Wire (A) from the main frame into the "SENSOR" hole on the back of
the Computer (18), and insert the Pulse wires (B) from the Handlebar (13) into the "PULSE" hole (B) on the back of
the Computer (18).
32
EN