Master MAS-X18 User Manual page 29

ASSEMBLY INSTRUCTIONS
5 easy steps to assemble then you're ready to workout – it takes approx 30 mins to assemble.
STEP 1
a. Fix the Front Stabilizer (4) to Main frame (1) using 2 x Carriage Bolts (5), 2 x Flat Washers (3) and 2 x Cap Nuts (2) provided.
b. Repeat Step a. to install the Rear Stabilizer (7) to Main Frame (1).
c. First align the Left Pedal (6L) with the left crank at an angle of 90 degrees (Vertically), then firmly fix the left Pedal
(6L) to the crank arm marked L in an anti-clockwise direction by the provided 13-15 Wrench (23) until tight.
d. First align the Right Pedal (6R) with the right crank at an angle of 90 degrees (Vertically), then firmly fix the right Pedal
(6R) to the crank arm marked R in a clockwise direction by the provided 13-15 Wrench (23) until tight.
Remarks: Failure to follow the above instructions could result in damage to the cranks and pedals.
29
EN