Connect Device; Receiver Configuration - Juniper Geode GNS3 User Manual

Owner's Manual

5.5.2 Connect Device

The Connect Device screen allows you to connect your iPad
or iPhone to the Geode.
For more information, see 4.2 Connect with the Geode on
page 26.

5.5.3 Receiver Configuration

Note: The Receiver Configuration options are only available
if you are actively connected to a Geode receiver. Changes
saved on these screens are changes made to the Geode
receiver, not Geode Connect. This means that these
changes crossover and are effective in other navigational
and data-collecting apps.
This page allows you to configure the Geode according to
the specific needs of your project or application.
41
Chapter 5 Learn Geode Connect for iPad and iPhone