Connect The Geode To A Mobile Device - Juniper Geode GNS3 User Manual

3.3 Connect the Geode to a Mobile
Device
The best way to connect your mobile device to the Geode
receiver is via Juniper Systems' Geode Connect app for
iPhone, Android, or Windows.
For more information about downloading and using Geode
Connect with your specific operating system, refer to:
■ Chapter 4: Set Up Geode Connect for iPad and
on page 26.
■ Chapter 6: Set Up Geode Connect for
64.
■ Chapter 8: Set Up Geode Connect for Windows
page 108.
Geode Connect is intended to serve as a connection and
configuration utility for the Geode receiver. Although it has
some data capture and mapping demonstration features,
it is not intended to replace your mapping, navigational, or
data-collection app. Juniper Systems partners with several
software developers who offer mapping applications that
can be used with the Geode.
Depending on what other mapping or data-collection
software you are using, Geode Connect may be required.
For example, you may need Geode Connect to serve as
an NTRIP client for another app, or you may need it to act
as the mock location provider on your Android device. For
more information, see
81.
Enable Mock Locations
Chapter 3 Getting Started
Owner's Manual
iPhone,
Android, on page
PC, on
on page
23