Connect Through Os - Juniper Geode GNS3 User Manual

3. On the Geode Connect Device page, tap Discover
Nearby Devices.
4. Tap OK.
5. In the Select An Accessory dialog box, select the serial
number of your Geode.
Note: The serial number can be found on the bottom of the
Geode.
When the Geode is paired with your iOS device, a green
"Pairing Successful" banner will appear.
6. On the Connect Device page, select your Geode.
When your Geode is selected, the Home page will appear.

4.2.2 Connect through OS

1. Power on the Geode.
2. Go to the Settings app on your iPhone.
3. Go to Bluetooth > Other Devices.
4. Select the Geode you wish to pair with. It will be listed
with its serial number, which can be found on the
bottom panel of the Geode.
5. Allow the iPhone to complete the pairing process.
6. Open Geode Connect.
Select Connect Device.
7.
8. Tap on the Geode you want to connect with.
Chapter 4 Set Up Geode Connect for iPad and iPhone
Owner's Manual
27