Set Up Geode Connect For Ipad And Iphone; Download And Install; The App Store; Connect With The Geode - Juniper Geode GNS3 User Manual

Geode GNS3 Real-Time Sub-Meter GPS Receiver
4. Set Up Geode Connect for iPad
and iPhone
As a configuration and communication utility for the Geode
GNS3 GPS Receiver, Geode Connect provides you with the
ability to establish communications with the Geode; change
receiver settings; and view position, altitude, estimated
horizontal error, differential status/fix information, speed,
heading, satellites in fix, correction signal, and PDOP.
This chapter gives an overview of the features included in
Geode Connect for iPad and iPhone. It gives details about
specific settings that can optimize the Geode's precision,
accuracy, and reliability, depending on the situation and
environment. It also gives specific instructions about the
nuances of using the Geode with iPad, iPhone, and third-
party apps.

4.1 Download and Install

Geode Connect is available for download in the App Store
and on the Juniper Systems website.

4.1.1 The App Store

Search for Geode Connect in the App Store. Install
according to the device instructions.

4.2 Connect with the Geode

To pair your Geode with an iPhone or iPad via Bluetooth,
you can use Geode Connect to connect your devices
directly or connect through the OS of your device before
connecting it in the Geode Connect app.

4.2.1 Connect through Geode Connect

1. Power on the Geode and open Geode Connect on your
device.
2. Click OK to pair your device with the Geode.
If the Geode has not been connected to this device before
you may need to search for nearby devices.
26
Chapter 4 Set Up Geode Connect for iPad and iPhone