Configure Virtual Port Settings - Juniper Geode GNS3 User Manual

Geode GNS3 Real-Time Sub-Meter GPS Receiver

9.5.6 Configure Virtual Port Settings

This configuration allows the Geode to use NTRIP data from
Geode Connect to correct its position and then send that
corrected position to the third-party app.
Note: The first time you select Virtual Ports, Geode Connect
may prompt you to install the Virtual Port Driver. Go ahead
and install it.
150
Chapter 9 Learn Geode Connect for Windows PC
Geode Connect for
Windows PC has a Virtual
COM Port Driver. You can
use this driver to configure
virtual COM ports as
writeable. Once writeable,
these ports can be used for
two-way communication
between the Geode and
third-party apps, allowing
the apps to both receive
and send information to the
Geode.
Virtual COM ports also
provide a convenient way
to connect the Geode to
both apps (Geode Connect
and the third-party app)
simultaneously.