Getting Started - Juniper Geode GNS3 User Manual

Geode GNS3 Real-Time Sub-Meter GPS Receiver

3. Getting Started

The Geode GPS Receiver is designed to be ready to use
right out of the box. Simply charge the battery and pair
the Geode with a Bluetooth
handheld device. The Geode may be used with most
mapping apps that use industry standard NMEA 0183
protocol.
Anatomy of the Geode
1
2
1 LED Status Indicators
2 Power Switch
5
6
5 M4 Amps Port
(1 of 2)
6 RS-232C Serial Port
20
Chapter 3 Getting Started
wireless technology-enabled
®
3 MCX Antenna Connector
4 USB-C
7 GNS3 Label
8 1/4"–20 Attachment Port
3
4
7
8