Table of Contents
Advertisement
This instruction manual is designed to help you gain a thorough understanding of the
operation of the equipment. Teledyne Isco recommends that you read this manual
completely before placing the equipment in service.
Although Isco designs reliability into all equipment, there is always the possibility of a
malfunction. This manual may help in diagnosing and repairing the malfunction.
If the problem persists, call or E-mail the Teledyne Isco Customer Service Department
for assistance. Contact information is provided below. Simple difficulties can often be
diagnosed over the phone. If it is necessary to return the equipment to the factory for
service, please follow the shipping instructions provided by the Customer Service
Department, including the use of the Return Authorization Number specified. Be
sure to include a note describing the malfunction. This will aid in the prompt
repair and return of the equipment.
Teledyne Isco welcomes suggestions that would improve the information presented in
this manual or enhance the operation of the equipment itself.
Teledyne Isco is continually improving its products and reserves the right to
change product specifications, replacement parts, schematics, and instruc-
tions without notice.
Phone:
Repair Service: (800) 775-2965
Fax:
E-mail address: info@isco.com
Web site:
Return equipment to: 4700 Superior Street, Lincoln, NE 68504-1398
Other correspondence: P.O. Box 82531, Lincoln, NE 68501-2531
This manual was originally written in English. Any versions of this man-
ual in a language other than English has been translated. Teledyne Isco
disclaims any responsibility, including all direct and consequential dam-
ages, for inaccurate translations of the content of this manual.
Users of any translated version of this manual agree that Teledyne Isco
shall not be held liable to anyone for any loss or injury caused in part or in
whole by the incomplete or inaccurate translation of this manual from its
original language.
Foreword
Contact Information
(800) 228-4373
(USA, Canada, Mexico)
(402) 464-0231
(Outside North America)
(Analytical and Process
Monitoring Instruments)
(800) 228-4373
(Samplers and Flow Meters)
(402) 465-3022
www.isco.com
Revised August 11, 2006
Advertisement
Table of Contents
