Table of Contents
Advertisement
CE Declaration of Conformity
DECLARATION OF CONFORMITY
Application of Council Directive:
Equipment Type/Environment:
Standards to which Conformity is Declared:
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
CISPR11/
EN 55011
EN61000-3-2, 3-3
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of August 2, 2006
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-4702-030
Rev A
Manufacturer's Name:
Manufacturer's Address:
Trade Name/Model No:
Year of Issue:
Description
Electrostatic Discharge
Radiated RF Immunity
Electrical Fast Transient
Surge on AC Lines
Conducted RF on AC lines
AC Dips and Short Interruptions
RF Emissions
Harmonic, Flicker
89/336/EEC – The EMC Directive
73/23/EEC – The Low Voltage Directive
Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
4700 Refrigerated Sampler
2006
EN 61010-1
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
EN 61326:1998 EMC Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
EN60529
Degrees of Protection Provided by the Enclosure IP-25
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m
Level 2 – 2kV on AC lines
2kV L-Gnd, 1KV L-L
150 kHz to 80 MHz,
3V rms, 80% modulated
0.5 Cycle, each polarity/100%
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance Criteria
A
A
A
A
A
A
Advertisement
Table of Contents
