Motorc Connection - Motorola WT41N0 Integrator Manual

4 - 2 WT41N0 Integrator Guide

MotoRC Connection

To control the Voice Only WT41N0 using the MotoRC software:
On the host computer, click Start > Programs > Motorola > MSP > MotoRC > Run Motorola Remote
1.
Control. The Run Motorola Remote Control DOS window opens followed by the Motorola Remote
Control window.
UI Control Icon
Motorola Remote Control Window
Figure 4-1
Click on the UI Control icon to display the Voice Only WT41N0 desktop.
2.