Four Slot Spare Battery Charger; Four Slot Ethernet Cradle - Motorola WT41N0 Integrator Manual

9 - 10 WT41N0 Integrator Guide

Four Slot Spare Battery Charger

Troubleshooting The Four Slot Spare Battery Charger
Table 9-2
Symptom
Batteries not
charging.

Four Slot Ethernet Cradle

Troubleshooting the Four Slot Ethernet Cradle
Table 9-3
Problem
Wearable terminal amber
Charge Status LED does not
light when wearable terminal
inserted.
Wearable terminal battery is
not charging.
Possible Cause
Battery was removed
from the charger or
charger was unplugged
from AC power too
soon.
Battery is faulty.
Battery contacts not
connected to charger.
Ambient temperature of
the charger is too warm
or too cold.
Cradle is not receiving power.
Wearable terminal is not
correctly seated.
Wearable terminal was
removed from cradle or cradle
was unplugged from AC power
too soon.
Battery is faulty.
The wearable terminal is not
fully seated in the cradle.
Ambient temperature of the
cradle is too warm or too cold.
Re-insert the battery in the charger or re-connect the charger's
power supply.
Verify that other batteries charge properly. If so, replace the faulty
battery.
Verify that the battery is seated in the battery well correctly with the
contacts facing down.
Move the charger to an area where the ambient temperature is
between 0 °C and 40 °C.
Cause
Ensure the power cable is connected
securely to both the cradle and to AC power.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly
seated.
Ensure cradle is receiving power. Ensure the
wearable terminal is seated correctly.
Verify that other batteries charge properly. If
so, replace the faulty battery.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly
seated.
Move the cradle to an area where the
ambient temperature is between 0 °C and
40 °C (32 °F and 104 °F).
Solution
Solution