Table of Contents
Advertisement
6 - 30 WT41N0 Integrator Guide
Using the Microsoft Bluetooth Stack
The following sections provide information on using the Microsoft Bluetooth stack.
Power Modes
The Bluetooth radio switches between normal and low power modes automatically. When data transfer is
required, the radio goes into normal mode. When there is no activity, the radio goes into low power mode.
Turning the Bluetooth Radio Mode On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, the wearable terminal can not be seen by or connected to other Bluetooth devices. Turn on the
Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with
Bluetooth radios in close proximity.
NOTE To achieve the best battery life in wearable terminals with multiple radios, turn off the radios that are not
being used.
Disabling Bluetooth
To disable Bluetooth, select Start > Settings > Control Panel > MotoBTUI and then select On icon in the top
left corner.
Disable Bluetooth
Figure 6-37
Enabling Bluetooth
To enable Bluetooth, select Start > Settings > Control Panel > MotoBTUI and then select Off icon in the top
left corner.
Enable Bluetooth
Figure 6-38
Advertisement
Table of Contents
Troubleshooting
