Weekly Maintenance - Brother GTXpro Quick User Manual

> Perform a new Nozzle Check after Head Cleaning to check the result and redo the cleaning up to 3 times.
Ensure all other maintenance has been performed such as cleaning the cap and wiper blade and see that the
wiper cassette is fresh and still has moisture. If there is no improvement by the 4th time, please contact support.
DEFLECTION & FLASH FIRING
Menu
> If this does not resolve the matter, please visit

WEEKLY MAINTENANCE

To achieve successful weekly maintenance you will have to do the following actions:
• Suction Cap Cleaning
• Exhaust Cap Cleaning
• Wiper Cleaning
• Nozzle Guard Cleaning
• Visual Inspection
> Always use this menu to perform cleanings or replace parts:
Menu
8
fig. 1
Only a few nozzles missing:
Perform a Powerful Cleaning
Head Cleaning
Maintenance
More than 10 nozzles missing:
Perform a Super Cleaning
Deflection appears as odd bunched up or
gapped lines where the horizontal bars will
appear blurred and staggered. When this is
present you will want to perform 2-3 Flash
Fire Cleanings.
After performing a Flash Fire Cleaning 2-3
times, perform another Nozzle Check to test
the results.
Flash Cleaning
BrotherDTG.com/Support
Maintenance Part Clean/Replace
fig. 2
select Print
Heads
to contact Brother Support.
WARNING
You will have 15 minutes to complete
any pending items for the maintenance
process. Prepare to complete all items
within the allotted time.