Maintenance - Brother GTX600 NB Instruction Manual


Remove the Filter and clean the compartment.

Replace mist fan filter
Perform replacement
Press [OK]
25k MAINTENANCE
5.4
The 25k maintenance needs to be performed every 25,000 prints after a bigger maintenance. That
means at 25k, 75k, 125k, 175k prints and so on. The 50k, 100k and 200k maintenances must be
performed by the responsible dealer.
The 25k maintenance contains general cleaning and the replacement of Wiper Blades, Cappings,
Flushing Foams and the Carriage Foam.
A TIP-Sheet how to perform the 25k maintenance can be found on Brother BASE:
Go to https://base.brother.digital
or
https://base.brother.digital/tip-sheets/gtx600-nb/maintenances/

Insert the new Filter and close the compartment.
> TIP-Sheets > GTX600 NB > Maintenances
23 / 27