Weekly Maintenance - Brother GTX Series Reference Manual

To achieve a good weekly maintenance you will have to do the following actions:
7
days
W E E K L Y M A I N T E N A N C E
+ Suction Cap Cleaning
+ Wiper Cleaning
> Always use this menu to perform cleanings or replace parts:
Menu Maintenance
>
Suction Cap & Exhaust Cleaning
The black silicon lips of the two cappings should be cleaned with the
Stick T dipped in Cleaning Solution.
It is necessary to remove the build-up of the remaining ink staying on the edges of
the cappings. It will prevent air leakage and keep the good suction of the pumps!
Be careful not to touch the foam! Keep it flat!
The four extrusion lances
sitting on the side of the capping at the Exhaust position
need also to be cleaned and free of dried ink.
Always clean first the hole at the front and go backward
while cleaning the lances and finish carefully by the last hole!
Suction Cap Cleaning
Maintenance Part Clean/Replace
>
[see in the blue circle]
Exhaust Cleaning

WEEKLY MAINTENANCE

+ Exhaust Cleaning
+ Nozzle Guards Cleaning
>
MENU MENU
and follow instructions on the display
OK OK
and the 2 holes
TO BE DONE EVERY WEEK
!
NEW Cleaning
Direction to clean
7