Table of Contents
Advertisement
Light Metering
Light Metering
According to the recording condition and
purpose, set light metering to measure
exposure time.
Before you begin
Set the POWER Switch to MANUAL
REC. (See page 19.) Press MENU to
display the MENU screen.
POWER Switch
1
Select Button
/ / /
2
MENU Button
38
SD5000. p36-40.p65
1
Press
and press
two settings shown below.
• Default setting is AUTO.
AUTO (No indication) :
Ideal for normal capturing, the
focus is set to the center portion
of the finder and the entire image
is metered.
: A small sphere in the center
portion of the finder is metered.
This mode is useful for capturing
back lit conditions, such as when
the subject is brightly lit.
2
Press MENU to exit.
• Selected mode will appear on
the LCD Viewfinder. (See page 9.)
For assistance, please call : 1-800-272-7033.
38
or
to select LIGHT METER
or
to select one of the
80/01/04, 11:40
Advertisement
Table of Contents
