Table of Contents
Advertisement
Capturing Images
Capturing Images
Quick Rec (FD)
This function works only for Floppy Disk.
This feature allows quick recording on a
floppy disk which is readable on this unit,
however it may not be readable on
another floppy drive.
Before you begin
Set the POWER Switch to REC or
MANUAL REC. (See pages 18, 19.) Press
MENU to display the MENU screen.
POWER Switch
1
Select Button
/ / /
2
MENU Button
Rec Review
When in REC or MANUAL REC mode, you can confirm the last captured image by
holding the
(-) button down. However, if the camera is turned off or if the disk was
removed, this feature will not work.
• If Rapid Fire is set to "ON", this feature cannot be used.
28
SD5000. p25-28.p65
1
Press
(FD) in the MENU screen and press
or
[ REC mode ]
2
Press MENU to exit.
Note
• If a floppy disk recorded with QUICK
REC (FD) "ON" is used on another
floppy drive, normal operation may fail.
In this case, record again with QUICK
REC (FD) "OFF" or copy the recording.
• REC flashes on the LCD Viewfinder
while the Digital Camera is processing
images. Images cannot be captured
while REC flashes.
For assistance, please call : 1-800-272-7033.
28
or
to select QUICK REC
to select ON.
[ MANUAL REC mode ]
BEEP
QUICK REC (FD)
80/01/04, 11:39
Advertisement
Table of Contents
