Table of Contents
Advertisement
Transferring Your Images (Macintosh)
Transferring Your Images (Macintosh)
Deleting a File (Folder) from the SuperDisk Drive
To delete a file (folder) from the Digital Camera.
• Drag and Drop the selected file or folder into the "Trash" icon.
Disconnection
1
End all applications and close all windows. (i.e. QuickTime, PhotoDeluxe, etc.)
2
Eject the Disk Media from the SuperDisk Slot. (See page 16.)
3
Disconnect the USB Cable (supplied) from your PC and change the POWER
Switch on the Digital Camera setting from PC mode to another selection.
Make sure that all of the applications and all of the windows are closed. Then
press the SHTR button.
Note
• If the USB Cable (Supplied) is connected before the AC Adaptor is connected, or, if the
AC Adaptor is disconnected before the USB Cable is disconnected, it is possible that
Macintosh will abort the operation.
• The USB Cable (supplied) must be disconnected as described in the above steps.
Removing the Disk Media
• When the PC recognizes the Disk Media, an icon, like the one
shown right, is displayed on the desktop.
• You can remove Disk Media from the Digital Camera by
dragging and dropping the Disk Media icon on the desktop into
the "Trash" icon.
• While the PC is starting up, the Disk Media cannot be removed,
even if the EJECT button on the Digital Camera is pressed.
• When a damaged Disk Media is inserted in the Digital Camera,
the Disk Media icon will not appear on the PC desktop. In this
case, the Disk Media can be removed by pressing the EJECT
button on the Digital Camera.
SD5000. p61-64.p65
61
61
80/01/04, 11:42
Advertisement
Table of Contents
