Table of Contents
Advertisement
These displays will alert you of a missed operation or provide further instructions.
Indication
DRIVE ERROR
READ ERROR
WRITE ERROR
DISK ERROR
(PUSH SHTR TO FORMAT)
DELETE ERROR
SD5000. p68-72.p65
Warning Indications
Warning Indications
Phenomenon
Failed to initialize the
If, after Power Switch is set to
drive.
OFF, then REC or PLAY again,
DRIVE ERROR is still
displayed, the camera may be
broken and needs repair.
The camera cannot read this
Failed to read.
image. Press + or - button to
play the next image. A READ
ERROR file cannot be delete in
DELETE menu. Please format
the disk, or delete with the PC.
If the problem occurred while
Failed to write.
capturing, please capture
again. If WRITE ERROR is still
displayed, the disk may be
defective, or could not be read.
Please reinsert the disk or
change disks. If the problem
occurred while setting a COPY
or PRINT MARK, please try
again. If still WRITE ERROR,
repeat this procedure.
If PUSH SHTR TO FORMAT is
Unsuitable disk.
displayed, you may format the
disk. If PUSH SHTR TO
FORMAT is not displayed, the
disk cannot be formatted. (Disks
that can be formatted were
once formatted under DOS or
Mac.)
If after second attempt to delete
Failed to delete the
again, DELETE ERROR is
file.
displayed, the disk may be
defective. Change disks.
71
Solution
71
80/01/04, 11:43
Advertisement
Table of Contents
