Panasonic SuperDisk PV-SD5000 Operating Instructions Manual page 27

Table of Contents

Advertisement

RapidFire™ Picture Taking
With this feature, captured images are first
stored in Camera memory. This speeds up
the processing time and allows you to
capture the next image right away.
Note
• AUDIO, SELF TIMER and TIME LAPSE
functions are automatically disabled when
RAPIDFIRE™ is set to ON.
Before you begin
Set the POWER Switch to REC or
MANUAL REC. (See pages 18, 19.)
POWER Switch
2
Select
Button
/ / /
1
REC
MODE Button
Note
• The Disk Media cannot be ejected until after the
memory data has been written. Press
button to write the memory data to the Disk
Media, then eject the Disk Media.
• Camera memory capacity is: 3 frames in SF
mode, 4 frames in FINE mode, and 12 frames
in NORMAL mode. While the Digital Camera
processes the images "REC" will flash on the
LCD Viewfinder, no further images can be
captured while REC is flashing.
• If there are images left in Camera memory
when the power is turned off, the images are
saved to the Disk Media and then power
goes off.
• To save images in Camera memory to the Disk
Media at any time, press the
• Images stored in Camera memory cannot be
deleted. Save the images to the Disk Media,
then refer to page 41 (To Delete Specific
Images).
SD5000. p25-28.p65
Capturing Images
Capturing Images
1
Press REC MODE repeatedly to
select recording mode (SF, F, N).
(See page 25.)
• If the REC mode is set to ZOOM (2X,
3X),
REC mode. (See page 25.)
2
Press MENU to display the MENU
screen. Press
in the MENU screen, and press
to select ON.
[ REC mode ] [ MANUAL REC mode ]
3
Press MENU to exit.
• If you select ON, "RAPID" is displayed
on the screen.
• RapidFire™ Page Remaining is
displayed on the screen.
RapidFire™
Page Remain
4
Press SHTR to capture the image.
3
• When page remaining becomes zero,
MENU Button
or when you change modes (e.g.
REC-->MANUAL REC), images are
automatically saved to the Disk
(+)
Media.
Caution
• If the Battery becomes depleted with
image data not saved to the Disk Media,
the image data will be lost. Always
confirm the Battery condition before
(+) button.
capturing images.
27
,
or TIFF mode, change
or
to select RAPID
or
27
80/01/04, 11:39

Advertisement

Table of Contents
loading

Table of Contents